ELITE 60

3 Compartment

Elite 60 is the largest capacity trunking in the Elite range, its two large compartments are accompanied by the smaller top opening lid compertment.

200 x 63mm profile

The largest of the Elite range, designed to cope with installations requiring a greater number of power and data cables

Greater Capacity

Elite 60 has been designed to carry a greater number of power and data cables, its main compartments able to house over 60 CAT6 data cables or over 100 CAT5e.

Extra Compartments

Additional dividing strips can be added to increase the trunking to up to 5 compartments.

DDA Compliance attainable

Elite 60 can accommodate Marco's contrasting centre lids, which can be used to attain DDA compliance throughout.

Available as BIM objects

Elite 60 BIM objects are available as part of Marco's uPVC BIM download on our website.

OVERVIEW

With its 200 x 63mm profile, Elite 60 is the largest trunking available in the Elite range.

Able to accommodate up to 60 CAT6 cables or over 100 CAT5 cables in its large centre compartment, Elite 60 has been designed from the ground up to serve as a perfect fit for installations which require a high capacity containment solution.

Elite 60 is manufactured from the same high impact resistant uPVC compound as other Marco trunking models and has a full range of pre-fabricated fittings and accessories.

Request Technical Data Sheet

PRODUCTS &
ACCESSORIES

  • MT60

    Marco's Elite 60 trunking system, 200 x 63mm profile with white finish.

  • MT60LGL

    Marco's Elite 60 trunking system, 200 x 63mm profile with white finish and light grey centre lid.

  • MT60CHL

    Marco's Elite 60 trunking system, 200 x 63mm profile with white finish and charcoal centre lid.

  • MT60FU/MT60FD

    Pre fabricated up and down mitre flat angles provided with a minimum 50mm bend radius to allow for cables to be laid in place avoiding the need to thread cables through apertures.

  • MT60T/MT60TD

    Pre-fabricated up and down flat tee junctions. Each is supplied with a minimum 50mm bend radius to allow for cables to be laid in place without the need to thread through apertures.

  • MT60I

    Moulded internal angle that sits on top of the trunking for a flush finish. Internal angle is supplied with a data guide, which acts as a bridge to carry cables through the angle, and maintain necessary bend radius.

  • MT60E

    The trunking for a flush finish. External angle is supplied with a data guide, acting as a bridge for cables whilst maintaining necessary bend radius.

  • MT60CL/MT60CR

    Moulded end caps, designed to match the profile of the trunking. Due to MT60’s shape, end caps are supplied in left and right handed variants. End caps supplied, in pairs of left and right handed variants.

  • MT60J

    Moulded joint covers with an easy clip in mechanism for faster installation. Supplied in packs of five.

  • MT60SD

    Slide in screening divider for Elite 60. Designed to reduce levels of alien crosstalk between compartments. Supplied in 1.5M Lengths.

  • MT60SDE

    Elite clip in screening divider for external angles. Maintains necessary bend radius and reduces crosstalk between compartments.

  • MTSB1

    35mm 1-gang socket mounting box with 2-lug configuration.

  • MTSB1-25

    25mm 1-gang socket mounting box with 2-lug configuration.

  • MTSB1-50

    50mm 1-gang socket mounting box with 2-lug configuration.

  • MTSB1-4

    35mm 1-gang socker mounting box with 4-lug configuration.

  • MTSB1-25-4

    25mm 1-gang socket mounting box with 4-lug configuration.

  • MTSB2

    35mm 2-gang socket mounting box with 2-lug configuration,.

  • MTSB2-25

    25mm 2-gang socket mounting box 2-lug configuration.

  • MTSB2-50

    50mm 2-gang socket mounting box with 2-lug configuration.

  • facebook
  • bbc
  • amazon
  • manchester
  • chester-zoo
  • dyson
  • selfridges