Accessories

Two-piece moulded flat angle with built in data guides to maintain necessary bend radius and cable segregation. Flat angle overlaps trunking, removing need for additional joint covers.

Moulded flat tee with two sets of data guides to maintain necessary bend radius and cable segregation. Tee overlaps trunking, removing need for additional joint covers.

Moulded internal angle with adjustable two-piece design allowing for a variance of 5 degrees in either direction to accommodate walls that do not have a true 90-degree bend.

Moulded external angle with adjustable two-piece design, allowing for a variance of 5 degrees in either direction, able to accommodate walls that do not have a true 90-degree bend.

Curved end caps, designed to match the design of the trunking.

Joint covers with an easy clip-in mechanism for faster fitting. Cover’s design complements the trunking, maintaining its appearance throughout. Supplied in packs of five.

RCD/MCB DIN Rail Housing Kit. Includes hinged cover, mounting frame and mounting bracket. Marco locking mechanism available.

Slide in screening divider for Elite 3. Designed to reduce levels of alien cross talk between compartments. Divider has the same pre-punched knockouts as the Elite trunking’s internal walls. Supplied in 1.5M Lengths.

Elite 3 clip in screening divider for external angles. Maintains necessary bend radius and reduces crosstalk between compartments.

Elite 3 Moulded take off adaptor. Designed to accommodate mini or conduit trunking.

35mm 1-gang socket mounting box with 2-lug configuration.

35mm 1-gang socket mounting box with 4-lug configuration.

25mm 1-gang socket mounting box with 2-lug configuration.

50mm 1-gang socket mounting box with 2-lug configuration.

25mm 1-gang socket mounting box with 4-lug configuration.

35mm 2-gang socket mounting box with 2-lug configuration.

25mm 2-gang socket mounting box with 2-lug configuration.

50mm 2-gang scket mounting box with 2-lug configuration.

Elite 3 uPVC trunking system, 175 x 60mm profile with white finish.

Elite 3 uPVC trunking system, 175 x 60mm profile with light grey finish.

Elite 3 uPVC trunking system, 175 x 60mm profile with charcoal finish.

Elite 3 uPVC trunking system, 175 x 60mm profile, white finish with DDA compliant light grey centre lid.

Elite 3 uPVC trunking system, 175 x 60mm profile, white finish with DDA compliant charcoial centre lid.

Moulded internal angle with adjustable two-piece design allowing for a variance of 5 degrees in either direction to accommodate walls that do not have a true 90-degree bend.

Moulded external angle with adjustable two-piece design, allowing for a variance of 5 degrees in either direction, able to accommodate walls that do not have a true 90-degree bend.

Curved end caps, designed to match the design of the trunking.

Two-piece moulded flat angle with built in data guides to maintain necessary bend radius and cable segregation. Internal angle’s exterior component sits above trunking, removing the need for joint covers.

Moulded flat tee with two sets of data guides to maintain necessary bend radius and cable segregation. Tee’s exterior component sits above trunking, removing need for joint covers.

Joint covers with an easy clip-in mechanism for faster fitting. Cover’s design complements Elite Compact’s smaller profile, maintaining its appearance throughout. Supplied in packs of five.

Slide in screening divider for Elite 3. Designed to reduce levels of alien crosstalk between compartments. Divider has the same pre-punched knockouts as the Elite trunking’s internal walls. Supplied in 1.5M Lengths.

Elite clip in screening divider for external angles. Maintains necessary bend radius and reduces crosstalk between compartments.

RCD/MCB DIN Rail Housing Kit. Includes hinged cover, mounting frame and mounting bracket. Marco locking mechanism available.

Elite Compact Moulded take off adaptor. Designed to accommodate mini or conduit trunking.

Elite Compact uPVC trunking system, 145 x 50mm profile, white finish with DDA compliant light grey centre lid.

35mm 1-gang socket mounting box with 4-lug configuration.

35mm 1-gang socket mounting box with 2-lug configuration.

50mm 1-gang socket mounting box with 2-lug configuration.

25mm 1-gang socket mounting box with 4-lug configuration.

35mm 2-gang socket mounting box with 2-lug configuration.

25mm 2-gang socket mounting box with 2-lug configuration.

50mm 2-gang socket mounting box with 2-lug configuration.

Elite Compact uPVC trunking system, 145 x 50mm profile with white finish.

Elite Compact uPVC trunking system, 145 x 50mm profile with light grey finish.

Elite Compact uPVC trunking system, 145 x 50mm profile with charcoal finish.

elite Compact uPVC trunking system, 145 x 50mm profile, white finish with DDA compliant charcoal centre lid.

25mm 1-gang socket mounting box with 2-lug configuration.

Pre fabricated up and down mitre flat angles provided with a minimum 50mm bend radius to allow for cables to be laid in place avoiding the need to thread cables through apertures.

Pre-fabricated up and down flat tee junctions. Each is supplied with a minimum 50mm bend radius to allow for cables to be laid in place without the need to thread through apertures.

Moulded internal angle that sits on top of the trunking for a flush finish. Internal angle is supplied with a data guide, which acts as a bridge to carry cables through the angle, and maintain necessary bend radius.

The trunking for a flush finish. External angle is supplied with a data guide, acting as a bridge for cables whilst maintaining necessary bend radius.

Moulded end caps, designed to match the profile of the trunking. Due to MT60’s shape, end caps are supplied in left and right handed variants. End caps supplied, in pairs of left and right handed variants.

Moulded joint covers with an easy clip in mechanism for faster installation. Supplied in packs of five.

Slide in screening divider for Elite 60. Designed to reduce levels of alien crosstalk between compartments. Supplied in 1.5M Lengths.

Elite clip in screening divider for external angles. Maintains necessary bend radius and reduces crosstalk between compartments.

35mm 1-gang socket mounting box with 2-lug configuration.

25mm 1-gang socket mounting box with 2-lug configuration.

50mm 1-gang socket mounting box with 2-lug configuration.

35mm 1-gang socker mounting box with 4-lug configuration.

25mm 1-gang socket mounting box with 4-lug configuration.

35mm 2-gang socket mounting box with 2-lug configuration,.

25mm 2-gang socket mounting box 2-lug configuration.

50mm 2-gang socket mounting box with 2-lug configuration.

Marco's Elite 60 trunking system, 200 x 63mm profile with white finish.

Marco's Elite 60 trunking system, 200 x 63mm profile with white finish and light grey centre lid.

Marco's Elite 60 trunking system, 200 x 63mm profile with white finish and charcoal centre lid.

The ideal solution for securing heavy duty wiring in place. Secure cables by using our Stainless Steel Cable Ties.

Large flexible fire rated cable clips which can be installed using various configurations.

Atkore Marco's Fire Fighter Clips are perfect for use in Elite 3 Trunking.

Pre-Fabricated Apollo dado flat angle. CAT5 as standard, angles can be made to accommodate CAT6 through use of Marco Data Guides. Fabricated as a mitre joint.

Pre-Fabricated Apollo Dado flat tee. CAT5 as standard, angles can be made to accommodate CAT6 through use of Marco Data Guides.

Moulded End Caps, designed to match profile of trunking with dado top and bottom lids.

Moulded internal angle. CAT5 compliant as standard, can be made to accommodate CAT 6 using Marco data guides.

Moulded external angle. CAT5 as standard can be made to accommodate CAT6 using Marco data guides.

Moulded joint cover designed to sit flush with the trunking.

Optional clip in data guides. Guides are installed before internal or external joint to provide cable segregation and bend radius for CAT6 cables.

Apollo 170 x 50mm uPVC trunking system, chamfered top and bottom lids, white ifnish.

Apollo 170 x 50mm uPVC trunking system, chamfered top and bottom lids with light grey centre lid.

Apollo 170 x 50mm uPVC trunking system, chamfered top and bottom lids with charcoal centre lid.

Apollo 170 x 50mm uPVC trunking system, square top and bottom ids, white finish.

Apollo 170 x 50mm uPVC trunking system, square top and bottom lids with light grey centre lid.

Apollo 170 x 50mm uPVC trunking system, square top and bottom lids with charcoal centre lid.

Apollo 170 x 50mm uPVC trunking system, chamfered top and square bottom lids, white finish.

Apollo 170 x 50mm uPVC trunking system, chamfered top and square bottom lids, light grey centre lid.

Apollo 170 x 50mm uPVC trunking system, chamfered top and square bottom lids, charcoal centre lid.

35mm 1-gang socket mounting box with 2-lug configuration.

25mm 1-gang socket mounting box with 2-lug configuration.

35mm 1-gang socket mounting box with 4-lug configuration.

25mm 1-gang socket mounting box with 4-lug configuration.

35mm 2-gang socket mounting box with 2-lug configuration.

25mm 2-gang socket mounting box with 2-lug configuration.

Pre-Fabricated Apollo dado flat angle. CAT5 as standard, angles can be made to accommodate CAT6 through use of Marco Data Guides. Fabricated as a mitre joint. Supplied as 4-compartment unit.

Pre-Fabricated Apollo Dado flat tee. CAT5 as standard, angles can be made to accommodate CAT6 through use of Marco Data Guides. Supplied as a pre-assembled 4-compartment unit.

Moulded End Caps, designed to match profile of trunking with dado top and bottom lids. Supplied as a 2 part fitting to accommodate Apollo 4’s extra compartment.

Moulded internal angle. CAT5 compliant as standard, can be made to accommodate CAT 6 using Marco data guides. Supplied as a 2 part fitting to accommodate Apollo 4’s extra compartment.

Moulded external angle. CAT5 as standard can be made to accommodate CAT6 using Marco data guides. Supplied as a 2 part fitting to accommodate Apollo 4’s extra compartment.

Moulded joint cover designed to sit flush with the trunking. Supplied as a 2 part fitting to accommodate Apollo 4’s extra compartment.

Apollo 257 x 50mm uPVC trunking system, chamfered top and bottom lids, white finish.

Apollo 257 x 50mm uPVC trunking system, chamfered top and square bottom bottom lids, white finish.

Apollo 257 x 50mm uPVC trunking system, square top and bottom lids, white finish.

Moulded one piece flat angle for vertical mounting.

Moulded one-piece flat tee for vertical mounting.

Moulded internal angle, maintains necessary cable bend radius.

Moulded external angle, maintains necessary cable bend radius.

Moulded end caps, designed to complement profile of trunking.

Moulded joint covers, designed to sit on top and flush with trunking. Supplied 5 per pack.

uPVC Dividing strip for Juno Trunking. Supplied in packs of 16 x 1.5M lengths.

Moulded cable retainer, designed to keep cables in place throughout entire Juno installation.

100 x 50mm Juno trunking system with pure white finish.

100 x 50mm Juno trunking, pure white body with light grey DDA compliant lid.

100 x 50mm Juno trunking, pure white body with charcoal DDA compliant lid.

50mm Maxi Trunking, Pure White Finish, 3 Metre Length

75mm Maxi Trunking, Pure White Finish, 3 Metre Length

100mm Maxi Trunking, Pure White Finish, 3 Metre Length

50mm Flat Angle

75mm Flat Angle

100mm Flat Angle

50mm Flat Tee

75mm Flat Tee

100mm Flat tee

50mm Internal Angle

75mm Internal Angle

100mm Internal Angle

50mm External Angle

75mm External Angle

100mm External Angle

50mm End Cover

75mm End Cover

100mm End Cover

50mm Joint Cover

75mm Joint Cover

100mm Joint Cover

CODE	DESCRIPTION	PACK SIZE
MM1BA	16 x 16 Box Adaptor	25
MM1C	16 x 16 End Cap	100
MM1E	16 x 16 External Angle	50
MM1F	16 x 16 Flat Angle	60
MM1I	16 x 16 Internal  Angle	50
MM1J	16 x 16 Joint Cover	40
MM1T	16 x 16 Flat Tee	20

CODE	DESCRIPTION	PACK SIZE
MM2BA	25 x 16 Box Adaptor	25
MM2C	25 x 16 End Cap	100
MM2E	25 x 16 External Angle	30
MM2F	25 x 16 Flat  Angle	30
MM2I	25 x 16 Internal  Angle	30
MM2J	25 x 16 Joint Cover	40
MM2T	25 x 16 Flat Tee	30

CODE	DESCRIPTION	PACK SIZE
MM3C	38 x 16 End Cap	50
MM3E	38 x 16 External Angle	25
MM3F	38 x 16 Flat  Angle	25
MM3I	38 x 16 Internal  Angle	25
MM3J	38 x 16 Joint Cover	25
MM3T	38 x 16 Flat Tee	25

CODE	DESCRIPTION	PACK SIZE
MM4C	38 x 25 End Cap	50
MM4E	38 x 25 External Angle	25
MM4F	38 x 25 Flat Angle	20
MM4I	38 x 25 Internal Angle	25
MM4J	38 x 25 Joint Cover	25
MM4T	38 x 25 Flat Tee	20

Power pole extension kit. Adds 1M in height to the standard power pole. Available in satin anodised aluminium and white powder coated finish.

Replacement Ceiling Shrouds

Replacement floor boot.

35mm socket box with 4-lug configuration allowing for vertical installation.

25mm socket box with 4-lug configuration allowing for vertical installation.

3.6 metre aluminium power pole, satin anodised finish with white uPVC centre lid.

3.6 metre aluminium power pole, white powder coated finish whith white uPVC centre lid.

Replacement Ceiling Shrouds                                              

Replacement floor boot.                                                             

35mm socket box with 4-lug configuration allowing for vertical installation.

25mm socket box with 4-lug configuration allowing for vertical installation.

650mm power post, satin anodised aluminium finish with white uPVC centre lid. Comes with pyramid top and floor boot.

650mm power post, white powder coated finish with white uPVC centre lid. Comes with pyramid top and floor boot.

Fabricated internal angle. Available in both aluminium and white powder coated finish.

Fabricated external angle. Available in both aluminium and white powder coated finish.

55mm accessory spacer.                                                   

Moulded uPVC bench trunking joint cover. Sits between two lengths of bench trunking to provide a flush finish.

Moulded uPVC end caps with screw fit fittings to ensure rigid fit.

uPVC divider designed specifically to fit in Marco bench trunking units.

35mm socket box with 4-lug configuration allowing for vertical installation.

25mm socket box with 4-lug configuration allowing for vertical installation.

35mm 2-gang socket box with 2-lug configuration.

25mm 2-gang socket box with 2-lug configuration.

Bench trunking, aluminium body, white uPVC centre lid.

Bench trunking, white powder-coated aluminium body, white uPVC centre lid.

1 Gang bench trunking unit.

1 Gang back-to-back bench trunking unit.

2 Gang bench trunking unit.

2 Gang back-to-back bench trunking unit.

3 Gang bench trunking unit.

3 Gang back-to-back bench trunking unit.

4 Gang bench trunking unit.

4 Gang back-to-back bench trunking unit.

Fast Fix Side Coupler for tray MC55.
 

Fast Fix Side Coupler Large for trays MC55, MC106.

 

Fast Fix Universal Strut Clip for trays MC30, MC55, MC106.

 

Quick-Coupler for trays MC30, MC55, MC106.

 

Quick-Lock Small for trays MC30, MC55, MC106.

 

Quick-Lock Large for trays MC30, MC55, MC106.

 

Quik-Clik Coupler for tray MC55.

 

Quik-Clik Coupler Medium for trays MC55, MC106.

 

Quik-Clik Coupler Large for trays MC55, MC106.

 

Clamp Large, Hole Diameter 6.5mm for trays MC30, MC55, MC106.

 

Clamp Large, Hole Diameter 8.2mm for tray MCG.

 

Drop Out Plate for trays MC30, MC55, MC106.

 

Divider Joining Bracket for trays MC30, MC55, MC106.

 

Suspension Hanger 10.2mm for trays MC30, MC55, MC106.

 

Flexible Conduit Plate 20, 25mm for trays MC30, MC55, MC106.

 

Flexible Conduit Plate 20, 25, 32mm for trays MC30, MC55, MC106.

 

Wall Bracket ACC Mounting Plate for trays MC30, MC55, MC106.

 

Multi-Fix Plate for trays MC30, MC55, MC106.
 

Universal Support Bracket for trays MC30, MC55, MC106.

 

Nut, Bolt & Clamp Assembly for trays MC30, MC55, MC106.

 

Nut, Bolt & Clamp Fixing Assembly for trays MC30, MC55, MC106.

 

Clamp Small for trays MC30, MC55, MC106.

 

Clamp Medium for trays MC30, MC55, MC106.

 

M6 x 20 Screw, Nut & Washer for trays MC30, MC55, MC106

 

Earth Terminal for trays MC30, MC55, MC106.

 

Splice Plate for trays MC30, MC55, MC106.

 

Splice Plate 90 degree for trays MC30, MC55, MC106.

 

Suspension Bracket for 6 & 8mm Rod for trays MC30, MC55, MC106.

 

Suspension Bracket for 10 & 12mm Rod for trays MC30, MC55, MC106.

 

Suspension Bracket for trays MC30, MC55

 

Suspension Bracket for trays MC30, MC55

 

Suspension Bracket for trays MC30, MC55

 

Bracket for trays MC30, MC55

 

Tray Support Bracket for trays MC30, MC55

 

Fast Fix Floor Bracket for trays MC30, MC55, MC106

 

ID Tags, Multiple colours available for all trays

Bolt Croppers for all trays
 

Steel Wire Cable Tray Lid
 

Code	Width (mm)	Length (mm)
MCL100	100	2000
MCL150	150	2000
MCL200	200	2000
MCL300	300	2000
MCL400	400	2000
MCL450	450	2000
MCL500	500	2000
MCL600	600	2000

 

Fast Fix Support Bracket
 

Code	Width (mm)	Length (mm)
MCCSB100	100	200
MCCSB150	150	250
MCCSB200	200	300
MCCSB300	300	400
MCCSB400	400	500
MCCSB450	450	550
MCCSB500	500	600
MCCSB600	600	700
MCCSB1000	1000	1100

 

Code	Description	Width (mm)	Length (mm)	For Trays
MCD30	Steel Wire Cable Tray Divider 30 x 3000mm	30	3000	MC30
MCD55	Steel Wire Cable Tray Divider 55 x 3000mm	55	3000	MC55
MCD106	Steel Wire Cable Tray Divider 106 x 3000mm	106	3000	MC106

 

Fast-Fix Wall Bracket
 

Code	Width (mm)	Capacity (kg)
MCWFB100	100	175
MCWFB150	150	200
MCWFB200	200	140
MCWFB300	300	100
MCWFB400	400	95
MCWFB450	450	70

Fast-Fix Ceiling Bracket
 

Code	Width (mm)	Capacity (kg)
MCCFB100	100	135
MCCFB150	150	125
MCCFB200	200	90
MCCFB300	300	75
MCCFB400	400	50
MCCFB450	450	44

Cantilever Bracket
 

Code	Width (mm)	Capacity (kg)
MCCB100	100	200
MCCB150	150	180
MCCB200	200	250
MCCB300	300	200
MCCB400	400	180

Wall / Floor Bracket
 

Code	Width (mm)
MCWB50	50
MCWB100	100
MCWB150	150
MCWB200	200
MCWB300	300
MCWB400	400
MCWB450	450
MCWB500	500
MCWB600	600

30mm deep steel wire cable tray.
 

Code	Size
MC3050	30 x 50mm
MC30100	30 x 100mm
MC30150	30 x 150mm
MC30200	30 x 200mm
MC30300	30 x 300mm
MC30400	30 x 400mm
MC30450	30 x 450mm
MC30500	30 x 500mm

55mm deep steel wire cable tray.

Code	Size
MC5550	55 x 50mm
MC55100	55 x 100mm
MC55150	55 x 150mm
MC55200	55 x 200mm
MC55300	55 x 300mm
MC55400	55 x 400mm
MC55450	55 x 450mm
MC55500	55 x 500mm
MC55600	55 x 600mm

106mm deep steel wire cable tray.

Code	Size
MC106100	106 x 100mm
MC106150	106 x 150mm
MC106200	106 x 200mm
MC106300	106 x 300mm
MC106400	106 x 400mm
MC106450	106 x 450mm
MC106500	106 x 500mm
MC106600	106 x 600mm

Code	Size
MCM3050	30 x 50 Quik-Clik Tray
MCM30100	30 x 100 Quik-Clik Tray
MCM30150	30 x 150 Quik-Clik Tray
MCM30200	30 x 200 Quik-Clik Tray
MCM30300	30 x 300 Quik-Clik Tray
MCM30400	30 x 400 Quik-Clik Tray
MCM30450	30 x 450 Quik-Clik Tray
MCM30500	30 x 500 Quik-Clik Tray
MCM30600	30 x 600 Quik-Clik Tray

Code	Size
MCM5550	55 x 50 Quik-Clik Tray
MCM55100	55 x 100 Quik-Clik Tray
MCM55150	55 x 150 Quik-Clik Tray
MCM55200	55 x 200 Quik-Clik Tray
MCM55300	55 x 300 Quik-Clik Tray
MCM55400	55 x 400 Quik-Clik Tray
MCM55450	55 x 450 Quik-Clik Tray
MCM55500	55 x 500 Quik-Clik Tray
MCM55600	55 x 600 Quik-Clik Tray

Code	Size
MCM106100	106 x 100 Quik-Clik Tray
MCM106150	106 x 150 Quik-Clik Tray
MCM106200	106 x 200 Quik-Clik Tray
MCM106300	106 x 300 Quik-Clik Tray
MCM106400	106 x 400 Quik-Clik Tray
MCM106450	106 x 450 Quik-Clik Tray
MCM106500	106 x 500 Quik-Clik Tray
MCM106600	106 x 600 Quik-Clik Tray

60 x 60mm G-shape steel wire cable tray.

60 x 100mm G-shape steel wire cable tray.

60 x 150mm G-shape steel wire cable tray.

60 x 200mm G-shape steel wire cable tray.