APOLLO 4 COMPARTMENT

Large Capacity

Apollo 4 is Marco's largest capacity perimeter trunking. Achieved through a supplied compartment extension kit.

3 Profiles

Apollo 4 is available with the same 3 profiles as Apollo 3, chamfer, skirting and square, making it adaptable to any specification.

More socket space

Apollo 4's larger centre compartments can both accept socket boxes, allowing for a greater number of outlets to be installed.

Pre-fabricated accessories

Internal bends and flat angles arrive pre fabricated, and ready to install.

DDA compliancy attainable

Both of Apollo 4's centre compartments can accept Marco's contrasting centre lid, making it available for jobs requiring Dda compliance.

Available as BIM objects

Apollo 4 is available as BIM objects as pat of Marco's uPVC BIM download on our website.

OVERVIEW

Available in both Dado and skirting, Apollo 4 compartment trunking offers separate compartments for power and data, and two high capacity centre compartments, ideal for installations where greater data needs exist.

Supplied as 3-compartment trunking with Marco MT4K1 kit to convert to 4 compartment.

Request Technical Data Sheet - Dado
Request Technical Data Sheet - Skirting
Request Technical Data Sheet - Square

PRODUCTS &
ACCESSORIES

  • MTD4

    Apollo 257 x 50mm uPVC trunking system, chamfered top and bottom lids, white finish.

  • MTS4

    Apollo 257 x 50mm uPVC trunking system, chamfered top and square bottom bottom lids, white finish.

  • MTDQ4

    Apollo 257 x 50mm uPVC trunking system, square top and bottom lids, white finish.

  • MTDF4, MTDQF4, MTSF4U, MTSF4D

    Pre-Fabricated Apollo dado flat angle. CAT5 as standard, angles can be made to accommodate CAT6 through use of Marco Data Guides. Fabricated as a mitre joint. Supplied as 4-compartment unit.

  • MTDT4, MTDQT4, MTST4

    Pre-Fabricated Apollo Dado flat tee. CAT5 as standard, angles can be made to accommodate CAT6 through use of Marco Data Guides. Supplied as a pre-assembled 4-compartment unit.

  • MTDC4*, MTDQC4*, MTDCR4*, MTSCL4*

    Moulded End Caps, designed to match profile of trunking with dado top and bottom lids. Supplied as a 2 part fitting to accommodate Apollo 4’s extra compartment.

  • MTDI4*, MTDQI4*, MTSI4*

    Moulded internal angle. CAT5 compliant as standard, can be made to accommodate CAT 6 using Marco data guides. Supplied as a 2 part fitting to accommodate Apollo 4’s extra compartment.

  • MTDE4*, MTDQE4, MTSE4*

    Moulded external angle. CAT5 as standard can be made to accommodate CAT6 using Marco data guides. Supplied as a 2 part fitting to accommodate Apollo 4’s extra compartment.

  • MTDJ4*, MTDQJ4*, MTSJ4*

    Moulded joint cover designed to sit flush with the trunking. Supplied as a 2 part fitting to accommodate Apollo 4’s extra compartment.

  • facebook
  • bbc
  • amazon
  • manchester
  • chester-zoo
  • dyson
  • selfridges